If you Have Any Questions About Walnut Oil Mill Process Related Please Dial Telephone Service+86 15738819095!

The Current Position:首页 > News

Walnut oil equipment, how much you know?

What are the key factors to determine the walnut oil press  equipment? What parts will determine the efficiency and effectiveness of the use of walnut oil equipment?

Four key effects of walnut oil  press equipment:

1, The rolling stock is the key to pretreatment, the relationship between the walnut oil and oil equipment production and quality of the pros and cons.

Key billet is blank rolling mill operation. In order to ensure the quality of rolling billet, to strictly control the billet material before the moisture and temperature. Billet rolling machine set the best softening box, so as not to soften contained in the loss of moisture and temperature. Before driving should carefully check blank rolling mill work, found at both ends of the blank thickness uneven, or without rolling oil mixed with the blank, should stop to check, adjust the roll gap (on both sides of the balance adjustment, and avoid the tune too tight). Check the scraper is close on the surface of the roller, to prevent sticking phenomenon. Pay attention to flow uniformity, prevent the no-load operation.

2, Extractor in each case loading for 80-85%, solvent temperature should master in 40 to 55 DEG C soybean blank into the leaching temperature for 40 to 55 DEG C, leaching temperature to 50 DEG C.

Spray the spray to drip is better, spray the liquid level to higher burden 30-50 mm is appropriate, spraying fresh solvent not to spill into the dry solvent ratio (weight of solvent and leach feed weight ratio) 1:0.8-1.1. The use of non-toxic solvents, the requirements of the walnut oil and grease equipment has a certain volatility, stable chemical properties, non flammable, explosive, narrow boiling range, water solubility is small, not corrosive machinery, and oil meal from the chemical reaction.


Characteristics of refining process of walnut oil : www.walnutoilpress.com/News/313.html